Particle filter 3M™ P3 R 5935

• CE approved for environments containing particles
• Use with 3M™ gas and vapor filters, 6000 series or 3M™ filter adapter 603
• Held in place by the required 3M™ filter holder, 501
• Allows filter replacement before gas and vapor filter replacement for cost savings
• Filters can help reduce exposure to certain airborne biological particles
• 3M™ Advanced Electret Media (AEM) is designed to provide breathing comfort with low weight
• Easy to assemble
• Use for protection in hazardous environments. For occupational use only.
3M™ bayonet particle filters can be attached to 3M™ bayonet-type gas and vapor filters in the 6000 series to provide particle protection against certain solid and liquid particles when used with 3M™ bayonet reusable respirators. Use 3M™ Filter Holder 501 to attach one filter to each gas and vapor filter.

3M™ bayonet particle filters are used to add particle protection to 3M™ bayonet filters against gas and vapour Replaceable for cost savings: These particle filters are designed to be easily replaced for a cost-effective solution without replacing your filters. Use 3M™ bayonet particle filters with 3M™ gas and vapor filters and 3M™ filter holders 501 to facilitate the filtration of certain particles, including dust, mist, fibers, and metal fumes, as well as many different gases and vapors. Or use these filters with 3M™ Filter Adapter 603 and 3M™ Filter Holder 501 to reduce exposure to particles only. These filters are easy to install and require minimal training. 3M™ Bayonet Particle Pre-Filters are compatible with 3M™ Half Face Masks in the 6000, 6500QL, and 7500 series or Full Face Masks in the 6000 series, helping to reduce inventory requirements. Protect your employees: 3M offers a free online tool to help you select the appropriate respirators, filters, and filter replacements for your workplace respiratory hazards and contaminants, as well as to help you determine filter replacement schedules. 3M Select and Service Life Software (www.3M.com/sls) contains more than 700 different chemicals and provides documentation of your choices. Once you have determined the contaminants and exposure levels in the work environment, protect your employees with a well-fitting 3M™
Reusable respirator and corresponding P2 or P3 particle filter. 3M™ bayonet particle filters are CE approved as either P2 or P3 particle filters and contribute to respiratory protection in environments containing particles when used with 3M™ bayonet half and full face masks and additional accessories. These filters provide respiratory protection against particulate contaminants. Not intended for use in environments that are immediately dangerous to life and health (IDLH) or require the use of a P2 or P3 approved filter. Replace your 3M™ bayonet particle filters if they become dirty, damaged, or difficult to breathe through.